how to use a paint sprayer for cabinets

How to Use a Paint Sprayer for Cabinets – Complete Tutorial

Are you wondering how to use a paint sprayer for cabinets? It is not a matter of concern. Rather than returning your old kitchen cabinets, make them new by repainting them. With an affordable paint sprayer and some gallons of paint, you can change your kitchen on holiday.

But, paint sprayers can be costly, especially models attached to a turbine.

how to use a paint sprayer for cabinets

How to Use a Paint Sprayer for Cabinets

There are several choices about painting cabinets! You can utilize latex paint or chalk paint. And afterward, there’s the fantastic choice to paint with a paint sprayer. This post will help you learn how to use a paint sprayer for cabinets. Let’s start.

Materials required:

  • A good paint sprayer
  • S. P. all-purpose cleaner
  • Non-flammable oil-based primer
  • TrueAirless 311 airless spray tip
  • Semi-gloss paint or stain or plastic enamel satin
  • Canvas drop cloth, plastic, or paper.
  • Rags & waste pail
  • Wing cord
  • Wood filler & putty knife
  • 2x4s on 2 paint cans or sawhorses
  • Safety glasses
  • Waste cardboard
  • Personal safety gear
  • Garden hose
  • Screwdrivers
  • 2 adjustable wrenches
  • Paint strainer & Rubber gloves

The most effective step to get an extra smooth finish with a sprayer

Strain your paint!

Regardless of whether you have new paint, there can, in any case, be a residue and jetsam that you want to remove from the paint.

Add Folderol to your paint.

We applied 6 TBS for the 16 oz paint sprayer holder. So what’s Floetrol? A paint-added substance helps water-based paints level and results in a smoother finish. It reduces brush and roller marks whenever utilized without a sprayer. Furthermore, it decreases mileage on shower guns.

Utilize the right nozzle.

For our purposes, that meant the more modest detail finish nozzle.

Have a go at utilizing thinner paint.

Firstly, we purchased the thickest, most costly paint with one coat finish ensure (I utilized Behr Marquee, and it wouldn’t arise from the sprayer). Thick paint is great for brushing on paint. Yet, it would help if you had more thin paint for a sprayer since you want to do some light covers. I utilized Behr Ultra-Premium paint, and it was great.

If you’re always having issues

Take the sprayer, clean it, and set it back up while checking the manual out. A dirty nozzle or, if you’re feeling the loss of a section, can bring about issues.

If all else fails

Call client care at 1-800-328-8251. We called Wagner sometimes for help and were so respectful of the tips they gave me!

What not to do when using a paint sprayer

Try not to utilize mineral spirits to thin plastic paint.

We attempted to thin the costly paint, and the person at the tool shop recommended mineral spirits. That was an awful idea! Mineral spirits will thin oil-based paints, yet water is better for diminishing water-based plastic paint.

Don’t overwater down your paint.

This will bring about runs and trickles. It will not be attractive. All things being equal, utilizing the Floetrol proposed previously.

Try not to test your paint on a cabinet.

Test on a piece of additional wood. If you drip paint all around your cupboards, you’ll have to sand them, and it’ll take always. And you’ll be really uncomfortable with yourself.

The most useful steps on how to use a paint sprayer for cabinet

Fun truth – I have my own 4 sprayers! However, sit back and relax. You need one. For this cabinet set, we utilized the Wagner 3000 sprayer. This sprayer accompanies two nozzles- one for better detail work and another one for bigger jobs like staining a wall or fences. We use the more modest tip and paint supply for tasks like furnishings or cabinets.

Instructions to set up the paint sprayer and work area

how to use a paint sprayer for cabinets

On this specific sprayer, and most Wagner sprayers, the bigger tip has three handles to change: the wind current, the paint stream, and the paint width. The detail nozzle just has the current wind controller. The two sizes have the choice to shower upward or evenly.  If your sprayer has different sizes, utilize the fine finish tip/canister (sometimes called the furniture firearm).

Although this sprayer can deal with most paints un-thinned, if you observe that you simply aren’t getting a very smooth finish or the sprayer is spitting, take a stab at thinner the paint with up to 10% water. I normally add ¼ a cup at a time and mix completely to test.

Note:

Before adding water, ask the paint agent. Like Benjamin Moore Advance, some paints can be differently affected by adding a lot of water.

As I referenced before, this specific kitchen had 47 cabinet doors and drawers to paint. We were advantageous to have an incomplete basement cellar region to set up in. However, I have some tips for any area you pick.

The doors and cabinet fronts should perfectly sit a piece raised off the floor to hold the wet sides back from contacting anything while at the same time drying. We utilized piece bits of 4×4, yet a bunch of plastic performance cups is modest and works incredibly!

Begin with the rear of the doors. While painting both within and outside the entryways, paint one side, let them sit for a week+ to somewhat fix it, and afterward do the opposite side.

Spray your cabinets and doors fronts off the ground. We utilized an old table and covered it with plastic to raise what we splashed off the ground. I painstakingly moved the “done” parts of their drying place. Each coat required around 2 hours, so our backs said thanks to us for not twisting around the entire time.

Master tips for How to Use a Paint Sprayer for Cabinets

Past the setup, utilizing the sprayer is more or less simple. Simply simple to use! Nonetheless, there are some of the fast tips to make the steps go without any stress:

  1. Wipe the tip with a cloth rarely as you go. Dried paint can expand on it, making your paint splatter.
  2. Always test a piece board (liked) or a huge piece of cardboard. Whenever you have some time off from utilizing the sprayer, consistently hit the test load up first. This includes after tops off or long breaks.
  3. If, after the initial not many cleanings, your paint sprayer won’t shower, check to ensure the little pinhole at the highest point of the attractions tube isn’t blocked.
  4. Begin by spraying off the board. Significance draws in the sprayer before you are over the top of the work item (or doors, cabinets for this situation). Spray as far as possible across, and let go of the trigger after you have gone off the door. If a sprayer scatters, it will probably happen when you draw in/separate the trigger.
  5. If you actually get a splash/orange strip, wipe off instantly until smooth and shower once more. (An illustration I took in the most difficult way possible when I began.) Sanding everything smooth again is significantly more boring to fix the slip-up and project fulfillment.
  6. Just like those dishes in the sink, cleaning the sprayer following use makes it more straightforward, guarantees proceeded with quality use and is all the upkeep you really want.

We realize that it sounds inside and out, yet we guarantee after you get its hang, you might end up involving a paint sprayer for a wide range of ventures around the house. It truly is compelling!

Conclusion:

We know that this vast universe of paint sprayers can be a genuine headache, so we trust this article assisted you with bettering your understanding of how to use a paint sprayer for cabinets. A spray painter is completely an investment, so it’s essential to track down one that actually looks at every one of your cases and is made to last. We hope you don’t have to go anywhere else if you read the above guide carefully. In the end, you will become an expert painter. Happy painting!

FAQ- How to Use a Paint Sprayer for Cabinets

What sort of paint do you use on cupboards?

Just utilize paint sturdy enough for cupboards and furniture. My never-bomb paints incorporate Benjamin Moore Advance and Fusion Mineral. Different paints I have utilized effectively incorporate Sherwin Williams Emerald Line, Behr Cabinet, Trim Paint, and Rustoleum Cabinet Transformations. For durable outcomes, add a top defensive coat.

Is it faster to spray or roll paint?

All the time you saved in planning will lost in how much longer it takes to move on paint. You can paint a divider ordinarily quicker with a paint sprayer than with a roller, no matter the planning time.

At any point, could you spray the cupboards with the doors connected?

We wouldn’t because it’d get in the hinges, and they wouldn’t open and close as without any problem. Or then again, you could paint them shut, which would be a failure.

Why didn’t you paint the upper cupboards first before the lower cupboards were installed?

Since we installed sideboards that should have paint on the lower cupboards. Showering includes a lot of prep and tidying up, so it’s ideal to do everything simultaneously. 

Would it be a good idea to add a reasonable topcoat to cupboards?

We strongly suggest a top coat for kitchen cupboards, regardless of whether the paint says it doesn’t require one. Polycrylic (now and then called Water-based polyurethane) will make them substantially stronger and simpler to clean things like dried food without hurting the paint finish.

Leave a Reply

Your email address will not be published.